Tuesday, 29 April 2014

FORCE ON FORCE TRAINING - Silvercore Firearms Training BC

FORCE ON FORCE TRAINING - Silvercore Firearms Training BC

BY HILTON YAM   |   POSTED ON 04/28/2014 |   IN TRAINING

When examining individual core skill development or the construction of a department training program, it is extremely critical to ensure the inclusion of force on force training.  Success in the tactical realm depends on mindset, mechanical skills, and good tactics.  All three should be vetted out using force on force training.  Some new wazoo Youtube technique should never be assumed to be acceptable no matter how excellent the beard of the guy demonstrating it, and nothing is worth anything if it doesn’t hold up to the harsh light of force on force application.

Force on force training should be conducted using tightly scripted scenarios, and never allowed to degenerate into paintball wars.  To build the proper winning mindset for your students, they must always be able to be successful.  In other words, never script a no win scenario.  Further, do not allow them to just “die” if they get hit.  Build a fighting mindset by forcing them to work through the barrage of paint, and their “wounds” can be critiqued when the scenario is solved.

Mechanical skills should first be taught with dry practice, tested at the range, and then reinforced with additional dry practice.  Shooters and trainers often get caught up with results on the square range, mistaking either paper target scores or par times as the complete end result for success.  There is no arguing that measurable performance metrics are important for developing and gauging skill sets, but it is vital to know that the skill sets being trained are relevant to the real world.  Script scenarios to test your skill sets, observe the techniques in action, and be critical of their utility.  Is that great new reload technique holding up while those paint pellets are flying?  Does that draw stroke work while trying to fend off role players in close quarters?

Lastly, tactics absolutely need to get ironed out in force on force training.  If you can’t safely execute the tactic while at risk from an armed adversary, then maybe you need to reexamine it.  A lot of stuff briefs up really great, but it is just hot air until you gear up and try it out.

If your department cannot afford Simunition conversion kits or you are in the CCW market and can’t attend a training by an authorized Simunition instructor, then consider using airsoft weapons instead.  Many CCW oriented instructors offer airsoft courses.  The key to this training lies in its structure, and less so on the hardware.  If you are really strapped, you can even do scenarios with inert plastic guns (like Ring’s Blueguns, but NEVER with live weapons!)  I truly feel that you are not ready for the street if you have not spent some time in force on force training.

C.T. http://modernserviceweapons.com/?p=7837


@Silvercore #Silvercore #Firearms #Training #BC #Force #nato #Ammunition #tag 

Sincerely,
Silvercore Firearms Training
604-940-7785
www.silvercore.ca

Monday, 28 April 2014

FN 5.7×28mm - Silvercore Training BC

FN 5.7×28mm - Silvercore Training BC



The FN 5.7×28mm is a small-caliber, high-velocity cartridge designed and manufactured by FN Herstal in Belgium. It is a bottlenecked centerfire cartridge that is somewhat similar to the .22 Hornet or .22 K-Hornet.[7] The 5.7×28mm was developed in conjunction with the FN P90 personal defense weapon (PDW) and FN Five-seven pistol, in response to NATO requests for a replacement for the 9×19mm Parabellum cartridge.

In 2002 and 2003, NATO conducted a series of tests with the intention of standardizing a PDW cartridge as a replacement for the 9×19mm Parabellum cartridge. The tests compared the relative merits of the 5.7×28mm cartridge and the 4.6×30mm cartridge, which was created by Heckler & Koch as a competitor to the 5.7×28mm. The NATO group subsequently recommended the 5.7×28mm cartridge, citing superior performance in testing, but the German delegation objected and the standardization process was indefinitely halted

C.T. http://en.wikipedia.org/wiki/FN_5.7%C3%9728mm

@Silvercore #Silvercore #Firearms #Training #BC #FN#5.7x28 #nato #Ammunition #tag 

Sincerely,
Silvercore Firearms Training
604-940-7785
www.silvercore.ca

Sunday, 27 April 2014

Youth Licence BC Age Range Increased- Silvercore Firearms Training BC

Youth Licence BC Age Range Increased- Silvercore Firearms Training BC



Effective April 1, 2013, an expanded age range for the Youth Hunting Licence will be in effect, making it available for youth ages 10 to 17 years, inclusive. Previously, the age range of the youth (‘junior’) hunting licence was 10 to 13 years.

It is anticipated the new licence will be available at Service BC locations and local vendors no later than March 20, 2013.

Expanding the age range of the youth hunting licence aims to ensure that hunting remains affordable for youth and their families. It also makes it easier for youth ages 14 to 17 (inclusive) to give hunting a try and to have more mentorship opportunities as they are no longer required to first complete the Conservation and Outdoor Recreation Education (CORE) course. A youth who is a B.C. resident and has completed CORE may purchase an adult hunting licence; however, a Hunter Number Card is first required.

As previously required, a parent or guardian must purchase, as well as hold, the youth hunting licence on behalf of the youth. To purchase the youth hunting licence, the parent or the guardian must sign an “Acknowledgement of Responsibility” form, confirming that the parent or guardian will be fully responsible for the actions of his or her child or ward while the child or ward is hunting or carrying a firearm. Youth (ages 10 to 17, inclusive) who participate in hunting in B.C. must be accompanied by, and under the close personal supervision of, an adult 18 years or age or older, who holds a hunting licence (unless exempted) and meets the qualifications as a supervising hunter.

Supervising Hunter For Youth
A supervising hunter must be 18 years of age or older, hold a hunting licence (other than an initiation hunting licence) or be exempted from holding a hunting licence, and meet the prescribed qualifications.

The prescribed qualifications are:

if the person is a resident, the person must hold a resident hunter number card (unless exempted);
if the person is a non-resident or non-resident alien, the person must have  passed a hunter safety training course anywhere in Canada or the USA;
the person must have held a hunting licence, other than an initiation hunting licence, in B.C. (unless exempted), or a licence to hunt elsewhere, in not fewer than 3 of any of the licence years preceding the current licence year;
if the person is an Indian residing in B.C., paragraphs (a) to (c) do not apply and the person must have received training in hunting and previously hunted lawfully without supervision, and
the person must not be prohibited from carrying or possessing a firearm.
The supervising hunter may accompany no more than two youths at one time (or no more than two initiation licence holders, or one youth and one initiation licence holder).

Bag Limits
Individual species licences may not be purchased under the youth hunting licence; youth under this licence do not have an individual bag limit for game. The supervising hunter must hold the appropriate uncancelled species licence for any species that is hunted. Any game killed by a youth must be accounted for and is part of the bag limit of the supervising hunter.

A B.C. resident youth who holds a valid expanded youth hunting licence may hunt in a Limited Entry Hunt (LEH) if accompanied by and under the close supervision of an adult who holds a valid species licence and a valid LEH authorization. The supervising hunter must cancel the species licence when an animal is taken and it is part of their bag limit.

If the youth, on whose behalf a youth hunting licence has been issued, is hunting with a licensed guide, the prescribed qualifications in item (a) to (c) do not apply to the supervising hunter and the youth is allowed their own bag limits for small game only.

@Silvercore #Silvercore #Firearms #Training #BC #youth #Junior #Hunting #Ammunition #tag 

Sincerely,
Silvercore Firearms Training
604-940-7785
www.silvercore.ca

Saturday, 26 April 2014

The youngest age a person can complete the CORE Hunter Education Course in BC is 10 years old - Silvercore Training BC

The youngest age a person can complete the CORE Hunter Education Course in BC is 10 years old - Silvercore Training BC



A 10 year old can take the CORE hunter education!  

Many people are asking about getting youngsters involved in hunting, particularly with the limited entry hunt (LEH) deadline fast approaching.  The key is that a 10 year old can take the CORE program. The confusion comes from the “Youth Licence” which i will address in detail in the next post.  Here is broad strokes:

Any one who is 10 years or older and completes the CORE is entitled to a resident hunter number. This lets them buy hunting licenses, species tags, have their own bag limits and enter into the LEH.  Individuals under 18 must be supervised.

The above is not true for individuals taking part in the “Youth Licence” program.  All bag limits filled under the “Youth Licence” are taken from the supervising hunter.

If you have any questions about junior hunting or the CORE program please call Silvercore Training 604-940-7785 or email info@silvercore.ca

Remember youth that complete the CORE are eligible for LEH. 

@Silvercore #Silvercore #Firearms #Training #BC #youth #Junior #Hunting #Ammunition #tag #CORE #Hunter #Education #BCWF #LEH

Sincerely,
Silvercore Firearms Training
604-940-7785
www.silvercore.ca

Day 1 of the Silvercore Handgun Level 3 at the Justice Institute of BC (JIBC)

Day 1 of the Silvercore Handgun Level 3 at the Justice Institute of BC (JIBC)



@Silvercore #Silvercore #Firearms #Training #BC #Safety #Handgun #tactical #JIBC

Sincerely,
Silvercore Firearms Training
604-940-7785

Thursday, 24 April 2014

EQUIPMENT VS. SKILLL - Silvercore Firearms Training BC

EQUIPMENT VS. SKILLL - Silvercore Firearms Training BC

BY JOE   |   POSTED ON 04/21/2014 BY JOE   |   Silvercore Firearms Training BC

The firearms industry is driven by the aftermarket, not necessarily the weapon manufacturers themselves. Through advertising, aftermarket manufacturers convince the average shooter that they “need” every trinket and gizmo to make themselves a better shooter. This seems to be a never ending battle I have with people, convincing them which is more important, the software or hardware.

A fast shooter is fast not because of his equipment which SO SO SO many people can’t grasp. A person isn’t a good shot because of the rifle he/she holds, the rifle is accurate because of the person holding it. I’ve used this analogy before, that you cannot purchase muscle memory and no matter how many things you bolt onto your gun the shot timer will not reflect large improvements without rounds sent down range. You can’t rent experience, or borrow the needed skill to make a difficult shot, make it through an actual gunfight or life threatening situation. Those reflexes and abilities are earned on the range, and too many people focus on the tool and not the skill to use it.

A mechanic isn’t the person with the shiniest Snap On tool box and fanciest tools, he has built up years of experience that helps him do his job efficiently and right the first time. I get asked a lot about what drills I would recommend to become a better shot with a precision rifle. I would venture to say, most good instructors can get new students the same or better results and smaller groups in an afternoon with a iron sighted 22lr or scoped 22lr at 50 yards than a .308, 6.5 Creedmor or equivalent. The same can be said of a carbine with iron sights or a standard Glock 9mm without all the work everyone thinks they absolutely need to put into it.

Now am I saying that these things, additions, technology doesn’t help in some aspect? No I am not. I would venture to ask, do most people even know the reason they put all the Pic rail attachment items, or modifications on their gun? Other than that they saw their favorite Youtube, high speed instructor using it that way? Each person brings different dimensions, hand sizes, eye dominance, previous injuries to the table that will lead to changes in body position, grip, what gun is comfortable, trigger finger placement, what sight someone prefers, shape of trigger, stock they put on a gun, or any million other modifications you can make to your personal firearm.

Have a good reason and know why each modification is for you and why, it will only help to make you a better shooter and have a much better understanding of your shooting style and skill level. I challenge anyone to start basic, shoot till your fingers bleed, and then shoot some more. Burn some barrels out, get your hands on as many different options as possible for everything before deciding that just because instructor X uses it that way it’s the way for you.


@Silvercore #Silvercore #Firearms #Training #BC #Safety #Handgun #Equipment #Skill

Sincerely,
Silvercore Firearms Training
604-940-7785
www.silvercore.ca

Silvercore Handgun Training at the Port Coquitlam & District Hunting & Fishing Club.  

Silvercore instructors spent the day training with a student for Handgun Level 3 at the Justice Institute of BC this coming weekend.  We hope everyone had the opportunity to get to the range over the long weekend!  

If you are itching to get out and train take a look at www.silvercore.ca  not just for courses but for our one day skill development days at the JIBC.

@Silvercore #Silvercore #Firearms #Training #BC #Safety #Handgun #tactical #JIBC
Sincerely,
Silvercore Firearms Training
604-940-7785
www.silvercore.ca

Monday, 21 April 2014

Silvercore Handgun Training at the Port Coquitlam & District Hunting & Fishing Club.

Silvercore Handgun Training at the Port Coquitlam & District Hunting & Fishing Club.  

Silvercore instructors spent the day training with a student for Handgun Level 3 at the Justice Institute of BC this coming weekend.  We hope everyone had the opportunity to get to the range over the long weekend!  

If you are itching to get out and train take a look at www.silvercore.ca  not just for courses but for our one day skill development days at the JIBC.

@Silvercore #Silvercore #Firearms #Training #BC #Safety #Handgun #tactical #JIBC
Sincerely,
Silvercore Firearms Training
604-940-7785
www.silvercore.ca

2,500 Meter Rifle Shot - Silvercore Firearms Training BC

2,500 Meter Rifle Shot - Silvercore Firearms Training BC

http://www.youtube.com/watch?v=AR6n7ztRJfs

Hitting a target more than 2,500 meters away proved to be no sweat for this long-range shooter, even though the bullet had to travel for almost a full five seconds in the air.

LiveLeak user Grizzman uploaded a video showing viewers his set up and successful near-1.5 mile shot with a .338 Lapua Magnum rifle and a metal target.

“A few days ago I took out the 338 Lapua and attempted the 2,500-yard shot,” Grizzman said. “So I placed the target at 2,530 yards or 1.43 miles away, at that distance the bullet flight time is almost 4.5 seconds!”

“I went out early in the morning to beat the mirage, luckly [sic] there was very little wind around 3-4 mph coming from the left, I dialed 2.6 mils Left,” the shooter explained on LiveLeak. “I had to dialed the maximum elevation my scope (Nightforce NXS 5.5-22×56 MIL/MIL) had at 27.4 mils then held over 2.5 mils on the reticle to get me to 29.9 mils.”

C.T. http://www.theblaze.com/stories/2014/04/21/watch-this-incredible-long-range-rifle-shot-from-nearly-1-5-miles-away/

@Silvercore #Silvercore #Firearms #Training #BC #Safety #Rifle #Ammo
Sincerely,
Silvercore Firearms Training
604-940-7785
www.silvercore.ca

Supersize Ammo - Silvercore Firearms Training

Supersize Ammo - Silvercore Firearms Training




@Silvercore #Silvercore #Firearms #Training #BC #Safety #Canada #Ammo
Sincerely,
Silvercore Firearms Training
604-940-7785
www.silvercore.ca

Saturday, 19 April 2014

Larry Vickers Training Scars - Reloading - Silvercore Firearms Training BC7198 vantage

Larry Vickers Training Scars - Reloading - Silvercore Firearms Training BC

C.T. http://www.youtube.com/watch?v=61Cnr78WUNg

@Silvercore #Silvercore #Firearms #Training #BC #Safety #Canada #Scars #Reloading
Sincerely,
Silvercore Firearms Training
604-940-7785
www.silvercore.ca



Day 1 of Silvercore Handgun 1. Students practice multiple target drill with laser shot and SIRT guns.

Day 1 of Silvercore Handgun 1. Students practice multiple target drill with laser shot and SIRT guns.



@Silvercore Training Inc. #Silvercore #Firearms #Training #BC #Safety #Canada @Laser Shot SA


Sincerely,
Silvercore Firearms Training
604-940-7785

https://plus.google.com/+SilvercoreCa

Friday, 18 April 2014

Trigger and Safety - Silvercore Firearms Training BC

Trigger and Safety - Silvercore Firearms Training BC


THE FNH SCAR- 16 - Silvercore Firearms Training BC

THE FNH SCAR- 16 - Silvercore Firearms Training BC



BY JERRY JONES   |   POSTED ON 04/17/2014 BY JERRY JONES   |   IN LONG GUNS REVIEW

In late 2004, FN Herstal won the contract from the United States Special Operations Command for a new, modular, and adaptable rifle system. The FNH entry was called the Special Operations Forces Combat Assault Rifle (SCAR). The new rifle system offering was rumored to be slated for several different calibers, including 6.8 SPC. To date, the FNH SCAR is only available in factory form in 5.56x45mm and 7.62x51mm. The FNH SCAR saw service with the United States Special Operations Command (SOCOM) in the two variants, the SCAR MK16 (5.56), commonly referred to as the SCAR-L for Light, and the MK17 (7.62), commonly referred to as the SCAR-H for Heavy. In 2010, SOCOM announced that it was cancelling the MK16 program. The initial claim was that the MK16 did not do anything better than the current M4 offerings.  To my knowledge, a couple of units still field the 5.56 SCAR-L in the 10.5 inch CQC variant. The SCAR family of rifles operate off of a short stroke piston system. The SCAR family of rifles are also completely ambidextrous, a bonus for left handed shooters who often are at the whim of right hand designs.

My love affair with the FNH SCAR line of rifles began in early 2010, when I acquired my first personally owned SCAR 16s.  The rifle is the civilian version which currently only is offered in the 16 inch, and in semi-automatic only. Some of the features really struck me. The first thing I noticed was the massive size of the bolt carrier. It appeared very well designed and more robust than the standard AR15 offerings.

Looking at the external features, the rifle was fully adaptable right out of the box. It requires no extra purchase of MIL-STD 1913 rails to mount any mission essential gear on. It is fully adjustable for both length of pull, and for cheek weld adjustment. The length of pull is helpful, as the ability to shorten the stock to fit various different day to day body armor styles is very helpful. The folding stock might be an asset for some officers, but I am neither hot nor cold on it.  I could see it might be a bonus for some in car mounting systems where space is limited. As I stated earlier, the rifle is fully ambidextrous.  It comes from the factory with an ambidextrous magazine release.  It also comes from the factory with an ambidextrous selector switch. It is also worth noting that the selector switch only rotates 45 degrees instead of the 90 degree selector found on most AR15 style rifles. The bolt on the SCAR line of rifles is reciprocating, and the bolt handle is designed so that it can be mounted on the left of right side to accommodate a wide variety of shooting styles.

In the next 15,000 or so rounds that went down the tube, one of the major perceived drawbacks to the weapon became pretty apparent to me.  The SCAR 16s gets hot when ran hard.  While the heat transfer on the bolt is minimal, the front of the factory fore arm and front sight block get very hot. Adding the FNH rail extension helps if your shooting style puts the off hand out front as far as possible. Or if you are going to run it hard, you can simply wear gloves. It isn’t really a problem for me as much as an observation. Aside from that, some officers that I work with and I have found the recoil impulse to be very accommodating to speed shooting.

Another of the perceived drawbacks of the SCAR line of rifles is the length and positioning of the bolt handle. Some operators have rightfully stated that depending on which optic that is used, it becomes harder to use the bolt handle due to how close the bolt handle rides to the mounting of the optic. There are a number of good offerings out there of after market bolt handles if this is a problem for you.

In my humble opinion, the police carbine has a few things that fall in the category of a must, and a couple that fall into the category of things that are nice to have.The first must is a good sling. The SCAR 16s has multiple sling points on the rifle as it comes from the factory.  They are both right and left side, and also include a slot in the top of the rear of the stock. It is completely left up to personal preference and the imagination on the set up of the sling. I personally like the HK style hooks on the Viking Tactics line of padded slings.  I also added a Magpul Rail Sling Adapter to the bottom rail and run it all the way back near the magwell. I like this a bit better if I have to transition to a pistol, or sling the rifle tight for whatever reason.

Another must is a good white light. While there are literally thousands of offerings out there, some are problematic due to the design of the SCAR rifle. I spent quite a while toying with the various light attachment designs. I am a fan of the Viking Tactics light mount attachments. However, to accommodate the bolt carrier design, the SCAR is a little taller than most AR15 designs. I prefer a lighting set up that I can shoot a high thumb, or C grip from either shoulder, without having to change my grip and style of shooting. The two methods I found that best accommodate this is to either run a 500 lumen SureFire X300 ultra at the 12 0′clock position or the SureFire M720V Raid light with the pressure switch at 12 o’clock on the top rail. A good white light and sling are the must on any police carbine.

The nice to have items start with a good quality red dot sight. The full length rail on top of the SCAR gives an officer a pretty wide latitude on where to mount it. The Aimpoint T1 is a great fit. I bought a tan EoTech and mounted it on one of my SCAR16s and ran it for a while without issue.  The T1 in an intermediate mount that provides absolute cowitness is a great option. The T1 has an obscene battery life and I just leave it on constantly. When I pull the rifle out of the trunk of my cruiser, I just have to chamber a round. I do not have to worry about turning my optic on, or worry about the battery running down. I just replace my Aimpoint battery in the spring when I change out my home smoke detector batteries and I am good to go.

I also run the Magpul stubby vertical fore grip on my SCAR rifles.  I use it primarily as a hand stop, and it also comes in handy in supported barricade shooting.

The last item that can be problematic with the use of a SCAR as a duty rifle is that not all magazines will work in the SCAR16s. Most GI spec metal magazines will work fine, but some of the Magpul magazines will not work in the SCAR16s. The new version Magpul Gen3 mags will work in the SCAR without issue. Older Magpul magazines can be successfully modified to work in the SCAR16s.  All it takes is a few minutes, a file and an internet connection.

The FNH SCAR16s is a great all round police carbine. Its modular design and ruggedness makes it ideal for police service in any conditions.

C.T. http://modernserviceweapons.com/?p=7626#more-7626

@Silvercore #Silvercore #Firearms #Training #BC #Safety #Canada #Scar-16
Sincerely,
Silvercore Firearms Training
604-940-7785
www.silvercore.ca

CHAMBERED ROUND VERIFICATION, AKA THE “PRESS CHECK” - Silvercore Firearms Training BC

CHAMBERED ROUND VERIFICATION, AKA THE “PRESS CHECK” - Silvercore Firearms Training BC

BY TIM LAU   |   POSTED ON 12/15/2012 BY TIM LAU   |   IN TRAINING



Recently, I’ve read some discussion on the Press Check, with some firearms instructors stating that it is unnecessary, that instead of a Press Check, one should simply conduct a tactical reload. Let’s start by defining what it is. A Press Check is, quite simply, the act of verifying that the weapon has a chambered cartridge and is ready to fire. On a semi-automatic pistol, this usually involves moving the slide rearward by about 3/4 of an inch and either visually or physically confirming that there is indeed a round in the chamber. In this article, I will discuss whether or not I feel this action is ever necessary to perform.

Before I go any further, let me state that my opinion comes from a very specific perspective, which may or may not be consistent with yours. My frame of reference comes from having been (and continue to be) an armed professional, for the better part of a decade-and-a-half. During this time, I carried on and off the job. I prepared for tactical missions by loading up prior to, and downloading afterward. As with most domestic law enforcement officers (and probably not enough of us do this), I carried a gun when I left work, during my off hours, and when I went back to work. These were not always the same gun. This can present issues that may not exist if one simply carries for a mission and then goes unarmed afterward; also, these issues may or may not exist in your world if you are looking at this as an armed, prepared citizen. Every tactic has a time and place, and it is always important to understand from what perspective someone is speaking from when evaluating the point being made.

On the issue of the Press Check, as I understand it, an argument against it goes something like this: the press check creates the habit of looking at the gun and decreases the user’s situational awareness. Having attended and taught one or two shooting courses in my career, I have indeed seen students ritualistically perform press checks between each and every shooting drill, so I can understand where this theory comes from. (I have also seen people ritualistically wave the gun left and right like a talisman warding away evil instead of conducting an actual assessment of their surroundings – but that article is for another day.) The anti-press-check argument continues by stating if you are unsure of the condition of your weapon due to storage issues, you should simply clear the weapon, and then reload it.

These arguments appear to stem from strict dogma that all weapon manipulations should be “tactical” and none should be simply administrative. The problem with these arguments is that they does not account for human nature and the reality of working with and being around firearms all the time. For example, I store my duty weapon in my locked locker at work. It remains loaded and ready. From time to time, someone may either go into my locker to retrieve or borrow unrelated equipment (there are master keys available to supervisors and others.) Since I am not the one and only person with potential access to my duty weapon, before I go on shift, I perform a quick press check to confirm my weapon has a chambered round and is fully loaded.

The anti-Press Check argument is to simply unload and reload every time. This can be done, but knowing policemen, many will simply not check rather than have to load and unload every time they go in service. Secondly, this advice is impractical. The big three ammunition makers (Remington, Federal and Winchester) all recommend discarding a round after it has been run through an action twice due to possible bullet setback issues and primer degradation. I don’t see cops or citizens embracing an SOP that requires them to discard or take out of service a $1-2 service cartridge every day or two.

In the case of long guns, most departments have SOP’s that dictate long guns be carried or stored in the following fashion: Chamber empty, full magazine in the gun. When preparing for a Search Warrant (for example), I will chamber a round just prior to going to the location. As many know, during the workup, there are many things that can distract you and take your attention elsewhere. While on the way, if I am unsure, I will conduct a quick press check to ensure I indeed chambered a round and am not carrying a long gun in “patrol ready”. It is cheap insurance and not done as some kind of mindless ritual.

In an ideal world, you need to know the condition of your weapon at all times. But what do you do when you realize you are unsure of the condition of your weapon? Clearing and reloading it every time is impractical, and people WILL NOT DO IT.

The Press Check is a simple and practical way to confirm your equipment is ready.


C.T. http://modernserviceweapons.com/?p=1519

@Silvercore #Silvercore #Firearms #Training #BC #Safety #Canada #presscheck
Sincerely,
Silvercore Firearms Training
604-940-7785
www.silvercore.ca

Thursday, 17 April 2014

The Barret XM109 - SILVERCORE FIREARMS TRAINING

The Barret XM109 - SILVERCORE FIREARMS TRAINING



Originally known as the “Payload Rifle” 

The Barret XM109. Chambered in 25 x 59mm. Capable of defeating light armor and material out to 2 km (1.2mi)

The XM109 offers greater range and a shorter overall length than the previous M82/M107 systems, as well as potentially greater power in the 25 × 59 mm cartridge over .50 BMG cartridge.

The rifle is currently under development by Barrett firearms Manufacturing.

C.T. http://weaponslover.tumblr.com/

@Silvercore #Silvercore #Firearms #Training #BC #Safety #Canada #Barret #XM109
Sincerely,
Silvercore Firearms Training
604-940-7785
www.silvercore.ca

Silvercore would like to thank Arc'teryx LEAF for their support in outfitting our instructors with their amazing gear.

Silvercore would like to thank Arc'teryx LEAF for their support in outfitting our instructors with their amazing gear. 



@Silvercore #Silvercore #Firearms #Training #BC #Safety #Canada #Arc’teryx #LEAF

@Arc'teryx  @Arc'teryxLEAF Silvercore Training

Sincerely,
Silvercore Firearms Training
604-940-7785
www.silvercore.ca
https://plus.google.com/+SilvercoreCa

Wednesday, 16 April 2014

Silver mounted Winchester Model 1894 Lever Action Rifle decorated by Tiffany & Co. - Silvercore Firearms BC

Silver mounted Winchester Model 1894 Lever Action Rifle decorated by Tiffany & Co. - Silvercore Firearms BC






@Silvercore #Silvercore #Firearms #Training #BC #Safety #Canada #Winchester #1894 #Tiffany&Co.

Sincerely,
Silvercore Firearms Training
604-940-7785
www.silvercore.ca

New 2014 Live Fire Courses from Silvercore Training

http://myemail.constantcontact.com/Silvercore-Training-upcoming-events.html?soid=1102857303352&aid=YEPZzp1XNR0#fblike



New 2014 Live Fire Courses from Silvercore Training



For further inquiries on Silvercore courses contact us,

604-940-7785










Skill Set Development Program

New 2014 Skill Set Development Dates

Refine and perfect your Handgun skills through industry structured programs designed for the armed professional while under the direct supervision and coaching of certified firearms instructors.  


JIBC LESD Handgun Familiarization 


New 2014 JIBC LESD Dates 

Learn handgun fundamentals commonly taught to armed professionals. A good introduction to those interested in a career in the law enforcement field.
















FANCY PLASTIC GUNS. DO WE NEED ‘EM? - Silvercore Firearms Training BC

FANCY PLASTIC GUNS. DO WE NEED ‘EM? - Silvercore Firearms Training BC

BY TIM LAU   |   POSTED ON 12/19/2013   |   IN MODERN SERVICE PISTOLS WEAPON MODIFICATIONS



A quick look on popular social media sites such as Facebook or Instagram will yield plenty of photos of highly modified modern pistols worked over by shops such as Boresight Solutions, Salient Arms, ATEi, and others?

 I don’t think it is debatable that the guns look damn sexy, but do these guns really need all that fancy, and expensive, work to be truly serviceable?

Take a look at the pistol above. This pistol started out as a Glock 17 RTF2 that had nothing more than aftermarket sights (10-8 Performance brass bead front and .140″ notch rear), a factory minus connector, Apex extractor, TangoDown mag catch, and a metric sh!tload of trigger presses. It was one of my favorite pistols to shoot because it was pretty accurate and extremely reliable. But when the opportunity to get some fancy machining done to it by ATEi, I couldn’t pass up the opportunity.

So now the pistol’s been back a couple weeks and I’ve had the opportunity to shoot the heck out of it on the range. Honestly, all that fancy work does not really affect the shootability of this gun. It shoots no better or worse with all that fancy metalwork. Where the work comes into play is during manipulations. Loading, unloading, and chambered round verifications become easier thanks to the secure grip the vertical serrations offer (especially the front ones.) Yes, that finish on Glocks and M&Ps is slick. Anyway, through welding and fancy CNC machining, ATEi deleted the stupid fish scales on the rear and replaced them with aggressive vertical serrations. The top serrations are not much more than cosmetic, so while I like the look, that’s not a “must have”.

With the above in mind, 99% of the population would be best served by getting a good set of sights, shooting the heck out of their modern pistol, and spend the money on ammunition and a SIRT Pistol from Next Level Training. But if you have the resources to eek out that last 5% of performance and ease of handling out of your pistol, then look to do these types of mods.

C.T. http://modernserviceweapons.com/?p=5451

@Silvercore #Silvercore #Firearms #Training #BC #Safety #Canada #H&K #Licence 

Sincerely,
Silvercore Firearms Training
604-940-7785
www.silvercore.ca

Tuesday, 15 April 2014

Lever Release vs. Button Release - SILVERCORE FIREARMS TRAINING BC

Lever Release vs. Button Release - SILVERCORE FIREARMS TRAINING BC



Which is easier to build muscle memory with? 

So many people dismiss the HK-style paddle/lever mag catch without putting serious time behind it, but at the same time there are folks who can't accept that some shooters genuinely just prefer the button. Personally, the ability to hit the paddle with my trigger finger is a huge boon because it allows me to drop the mag without shifting my grip at all. SO:
Which is easier to build muscle memory with? 
Lever Release vs. Button Release

C.T. https://www.facebook.com/hecklerandkoch/photos/a.492278300813461.114246.107615925946369/613578315350125/?type=1&theater

@Silvercore #Silvercore #Firearms #Training #BC #Safety #Canada #H&K #Licence 

Sincerely,
Silvercore Firearms Training
604-940-7785
www.silvercore.ca

700 grain lead flat nose bullet for the 500 S&W Magnum - Silvercore Firearms Training BC

700 grain lead flat nose bullet for the 500 S&W Magnum - Silvercore Firearms Training BC





A 700 grain lead flat nose bullet for the 500 S&W Magnum. First photo shows just the bullet next to a .40 S&W. Second photo the complete round next to a .22 LR. Third photo with a 45-70 Govt and .40 S&W flanking it. (GRH)
C.T. http://forum.pafoa.org/ammunition-reloading-25/213890-700-grain-reloads-s-w-500-a.html

C.T. http://gunrunnerhell.tumblr.com/

@Silvercore #Silvercore #Firearms #Training #BC #Safety #Canada #GunSafe #Licence

Sincerely,
Silvercore Firearms Training
604-940-7785
www.silvercore.ca

Monday, 14 April 2014

THE MODIFIED GLOCK - Silvercore Firearms Training BC

THE MODIFIED GLOCK - Silvercore Firearms Training BC

BY JERRY JONES   |   POSTED ON 04/14/2014 |   IN 10-8 CONSULTING COURSES 10-8 PERFORMANCE GEAR MODERN SERVICE PISTOLS WEAPON MAINTENANCE WEAPON MODIFICATION



Glocks tend to run great out of the box.  They are reliable, and accurate.  I have a friend who shoots a lot of 3 gun and IDPA with a completely stock Glock 17 with the plastic sights, and does it well.  Some folks like to simply change out of the plastic “filler” sights that come stock, for aftermarket sights such as 10-8′s.I like my Glocks a bit more modified.  Above is a brand new Gen4 G19 that is a recent acquisition.  The gun shot great out of the box, but there are changes that I like to make for my own benefit.The first thing that has to go for me is the serrated trigger and trigger bar that come standard on compact and subcompact Glocks.  After a few hundred rounds down range, the serrated trigger becomes bothersome for me, so I just swap it out for the non-serrated full size trigger.

The next thing I like to change is the connector.  While the stock connector, or (-) minus connector can be shot well, I like the addition of the Ghost Rocket 3.5 “Deluxe”.  Across the dozen or so Glocks that I own, the trigger pull across the board with the Ghost Rocket and factory trigger return spring lends a pull of about 4.25 to 4.5 pounds.  But the reduction in poundage isn’t the reason I like them.  I like them because I can get a smooth prep shot to shot, even at four or five shots per second.  The factory connectors tend to wind up with a little “pressure wall” at the end of the trigger stroke, when can disrupt the sights just a bit at the time of ignition.

Moving onward, I add an extended slide stop to my G19′s.  While I don’t like them on the G26, G17, or G34 (or the .40 caliber counterparts), I do like the extended slide stop on the G19.A good set of sights.  I like and advocate 10-8′s.  I also have guns set up with Trijicon HD’s, and Scott Warren’s.  The thing I’ll caution people to is that you do need to research the particular sights before you purchase them, if you intend on shooting the gun past conversational distances.  A lot of the sighting systems out there will cause the point of impact to be above the point of aim on Glocks.  It is the nature of the beast.

I like the “butt plug” on the Glock, and have used them for years.  On the Gen3′s I used mainly the Jentra, but this round I bought two or three and tried them out.  I use them for an aid on the reload, and the Pearce seems to work the best for me.

Rounding the gun out with an Apex FRE, some spare recoil springs, a few plus two extensions to play with and 20 new G19 factory magazines, and this is going to probably be my primary training and teaching gun for 2014.Glocks run fine out of the box.  If you like a little modification, like I do, they run a bit better!

C.T. http://modernserviceweapons.com/?p=7622

@Silvercore #Silvercore #Firearms #Training #BC #Safety #Canada #Glock #Modifications

Sincerely,
Silvercore Firearms Training
604-940-7785
www.silvercore.ca
https://plus.google.com/+SilvercoreCa

Sunday, 13 April 2014

Accuracy International (AI) -Silvercore Firearms Training BC

Snipers aim to remain unseen but one made headlines last month when he killed six Taliban in Afghanistan with a single shot, by hitting the trigger of a suicide bomb.

The near 1,000-yard shot the British soldier took was made using an L115A3 rifle produced by Accuracy International (AI), a small company based on the outskirts of Portsmouth.

This feat is just one of many achieved by troops armed with AI products. The world record of 2,710 yards – more than a mile and a half – is held by Corporal of Horse Craig Harrison, of the Household Cavalry.
Shooting at a Taliban machine-gun position that was attacking an Afghan army patrol, it took Harrison’s bullet nearly three seconds to hit its target – a shot he then repeated twice more.
That AI can produce rifles capable of such precision is incredible in itself. That the company which makes the weapon of choice for Britain’s elite marksmen and special forces started out in the garage of one of its founders is perhaps even more remarkable.


C.T.http://www.telegraph.co.uk/finance/newsbysector/industry/defence/10762782/Accuracy-International-the-gun-maker-of-choice-for-Britains-elite-marksmen.html
@Silvercore#Silvercore #Firearms #Training #BC #Safety #Canada#GunSafe #AI #AccuracyInternational

Sincerely,
Silvercore Firearms Training
604-940-7785
www.silvercore.ca
https://plus.google.com/+SilvercoreCa

SHOOTING WITHOUT…YOURSELF - Silvercore Firearms Training BC
BY ARIK LEVY   |   POSTED ON 04/10/2014 |   Silvercore



 So, what the hell does that mean? We often go to the range, start shooting a drill or even bullseye practice, and begin to make judgements.  “Damn, my shots keeping going to the left.”  “I’m shooting too slow”.  “Why can’t my group look like his group?” or even, “I suck!”  This is your ego or more commonly known as the conscious mind.  It tells us what’s going on.  It’s that running monologue in your head.  This reminds of me of the scene in the iconic Tom Cruise movie, “The Last Samurai.”  In it, our hero has learned the art of the sword and is in a competition with one of the instructors.  As it goes on, he has a hard time connecting and summarily gets his butt kicked.

At this point one of the spectators chimes in on the downtrodden student and gives him the following advice.  “..please forgive me, too many minds”  “..What?” he asks.  “..mind the sword, mind face, mind the people watching, ..to many mind”  Again our hero is puzzled.  “No Mind..” the sage guides him.

Tom was worried about too many things (see what you can relate to):  Thinking about his technique.  Thinking about how he felt.  Thinking about what other people were thinking…Too many minds.  No mind.  You need to calm that inner center and stop the conscious from “trying” to take over.  Studies have show that the conscious mind can only truly concentrate on one thing at a time.  The subconscious can handle multiple things at the same time.  That’s why you hear coaches and teachers expound the doing from the subconscious.  But far too often that sounds like a bunch of mumbo jumbo.  What does it really mean?

You need to develop your subconscious skills (drawing, pulling the trigger, grip, etc.) through hours of repetition of dry practice.  Sounds like a lot.  10 minutes a day becomes over an hour a week, which then becomes 4 hours a month, which becomes almost 50 hours a year.  I’ve been there.  Ten minutes grows to 15 minutes easily because we like to do it.  Once we commit to working the subconscious, we no longer need to worry about it.  It’s there in the background, skill without thought.  We then need to turn off the constant chatter of the ego and let the skill work.  Try it at your next practice.  No mind…

C.T. http://modernserviceweapons.com/?p=7549#more-7549

@Silvercore #Silvercore #Firearms #Training #BC #Safety #Canada #GunSafe #Licence 

Sincerely,
Silvercore Firearms Training
604-940-7785
www.silvercore.ca

Saturday, 12 April 2014

How Not To Dry Off Your Polymer Pistol - Silvercore Firearms Training

How Not To Dry Off Your Polymer Pistol - Silvercore Firearms Training




During all of Silvercore's firearms courses we caution our students to view information from the internet with scrutiny.  Individuals often bring up the using home appliances for one reason or another to clean guns. Here is a cautionary tale:

These photos are of a Sig Sauer Pro that was left in an electric oven at 210°c / 400°f for 20 minutes. After cleaning it was put in to dry. The owner was then distracted by a phone call. -

C.T. http://www.thefirearmblog.com/blog/2008/12/22/sig-oven-bad-idea/

@Silvercore #Silvercore #Firearms #Training #BC #Safety #Canada #Cleaning #Gun Safe #Servicing  

Sincerely,
Silvercore Firearms Training
604-940-7785
www.silvercore.ca

Friday, 11 April 2014

GLOCK VS. M&P REVISITED - Silvercore Firearms Training

GLOCK VS. M&P REVISITED - Silvercore Firearms Training

BY HILTON YAM   |   POSTED ON 04/07/2014   |   IN MODERN SERVICE PISTOLS



A couple years ago, I wrote an article titled “Glock vs. M&P…or Why I Shoot An M&P.”  At the time that I wrote the article, the Gen4 Glock was still in an early phase of adoption and had some function issues, and the M&P had not yet begun what is now the most current round of production upgrades. Since no one seems to read the linked articles, I’ll sum it up for you right here: I opted to work around the issues of the M&P, using that as my primary training gun – M&P fans cheered, Glock fans burned me in effigy. I thought it would be worthwhile to revisit this now that the state of both pistols has changed quite a bit in the last couple years. 

The M&P has undergone a series of production upgrades in the last 2 years which makes it a very strong candidate for an out of the box service pistol, with no significant flaws.  The previously known issues with accuracy of the factory barrels with the 1:18.75″ twist have been resolved with new barrels featuring a 1:10″ twist, the same as in factory Glock barrels.  The M&P is no longer ammunition sensitive, and provides accuracy similar to the Glock using various bullet weights.  The M&P slide stop, trigger bar, and sear have gone through several generational changes, and the latest guns have crisp breaking trigger with reduced overtravel and positive reset.

Glocks, in particular the Gen4 9mm variants, have undergone changes with the ejectors and recoil spring assemblies, largely resolving the reliability issues of the early guns.

If you are shooting .40 because of departmental constraints, then the playing field has leveled out a bit with the production of the Gen4 Glock, which offers a purpose built dual recoil spring system which significantly softens the recoil and promotes greater longevity than the Gen3 guns.  Function with attached weapon lights is also dramatically improved in the Gen4.  Only 2 years ago, the clear choice in .40 was the M&P, but now users have the added option of the Gen4 Glock 22 or 23.

On of the other quirks that I highlighted in the original article compared reloading in both guns, and that has not changed.  The M&P still has the edge in factory configuration, as the Glock frames still have the big hole at the rear of the frame which is a huge snag point for incoming reloads.  If department policy permits, this is an easy fix with the installation of an inexpensive grip plug.

Another feature was that of magazine disassembly, which for some reason brought on some bit of ire from readers.  The Glock magazine is still slower and more difficult to disassemble than the M&P – if you don’t believe me, time yourself disassembling 4 mags.  Why should you care?  If you train enough, you’ll end up out in the rain or mud and a mag is sure to end up nose down in something which should be cleaned out of the tube.  The M&P mag is quick to disassemble for cleaning, and my Glock mags have defaulted to getting brushed out in the assembled state.  No real functional advantage to either platform here, just different if you are rebuilding mags or installing base pads (which I do a lot, since we seem to have a lot of those here).

Given the choice between the two bone stock pistols as pictured above, the current state of manufacturing has left us in a dead heat.  Sorry, not much fodder for flaming me on fan forum threads, but it’s a good thing for the end user as both the Glock and M&P are solid contenders now.  It’s just up to you to choose which one fits your needs best.

C.T. http://modernserviceweapons.com/?p=7556
@Silvercore #Silvercore #Firearms #Training #BC #Safety #Canada #M&p #Gun Safe #Glock

Sincerely,
Silvercore Firearms Training
604-940-7785
www.silvercore.ca