Showing posts with label gun. Show all posts
Showing posts with label gun. Show all posts

Wednesday, 14 May 2014

2 mm Kolibri - World Smallest Production Handgun - Silvercore Firearms Training BC


2 mm Kolibri - World Smallest Production Handgun - Silvercore Firearms Training BC

The 2 mm Kolibri (also known as the 2.7 mm Kolibri Car Pistol or 2.7×9 mm Kolibri) is the smallest commercially available centerfire cartridge, patented in 1910 and introduced in 1914 by Franz Pfannl, an Austrian watchmaker, with financial support from Georg Grabner. It was designed to accompany the Kolibri semi-auto pistol or single shot pistol, both marketed as a self-defense weapon.

The cartridge weighed 5.3 grams (82 grains), measured 3 millimeters (0.12 in) at its widest point, and 11 mm (0.43 in) from the base of the primer to the tip of the bullet. The cartridge headspaced on the mouth of the case. The bullet itself weighed 0.2 g (3 grains), and was estimated to have a normal muzzle velocity of 200 m/s (650 fps), resulting in a muzzle energy 4.0 joules (3 foot-pounds).

The round was not accepted overly well. The 2 mm Kolibri's small size made handling and loading individual cartridges difficult, and the bullet itself was fairly weak, literature at the time suggesting the round was capable of penetrating only 10–40 mm (0.4 to 1.6 inches) of pine board. The round also suffered some accuracy issues, since the technology of the time was incapable of applying rifling to the bore of such a small caliber, resulting in no spin on the bullet.

The series, and most weapons by Franz Pfannl, were discontinued in 1938.

The cartridge (and related firearm series) is now a collector's item, with individual rounds going for over US$70. Original guns for this round can sell for US$5,000.

C.T. http://en.wikipedia.org/wiki/2_mm_Kolibri

@Silvercore #Silvercore #Firearms #Training #BC #PAL #Funny #Mag #Flip

Sincerely,
Silvercore Firearms Training
7198 Vantage Way Delta, BC V4G 1K7
604-940-7785

Thursday, 24 April 2014

EQUIPMENT VS. SKILLL - Silvercore Firearms Training BC

EQUIPMENT VS. SKILLL - Silvercore Firearms Training BC

BY JOE   |   POSTED ON 04/21/2014 BY JOE   |   Silvercore Firearms Training BC

The firearms industry is driven by the aftermarket, not necessarily the weapon manufacturers themselves. Through advertising, aftermarket manufacturers convince the average shooter that they “need” every trinket and gizmo to make themselves a better shooter. This seems to be a never ending battle I have with people, convincing them which is more important, the software or hardware.

A fast shooter is fast not because of his equipment which SO SO SO many people can’t grasp. A person isn’t a good shot because of the rifle he/she holds, the rifle is accurate because of the person holding it. I’ve used this analogy before, that you cannot purchase muscle memory and no matter how many things you bolt onto your gun the shot timer will not reflect large improvements without rounds sent down range. You can’t rent experience, or borrow the needed skill to make a difficult shot, make it through an actual gunfight or life threatening situation. Those reflexes and abilities are earned on the range, and too many people focus on the tool and not the skill to use it.

A mechanic isn’t the person with the shiniest Snap On tool box and fanciest tools, he has built up years of experience that helps him do his job efficiently and right the first time. I get asked a lot about what drills I would recommend to become a better shot with a precision rifle. I would venture to say, most good instructors can get new students the same or better results and smaller groups in an afternoon with a iron sighted 22lr or scoped 22lr at 50 yards than a .308, 6.5 Creedmor or equivalent. The same can be said of a carbine with iron sights or a standard Glock 9mm without all the work everyone thinks they absolutely need to put into it.

Now am I saying that these things, additions, technology doesn’t help in some aspect? No I am not. I would venture to ask, do most people even know the reason they put all the Pic rail attachment items, or modifications on their gun? Other than that they saw their favorite Youtube, high speed instructor using it that way? Each person brings different dimensions, hand sizes, eye dominance, previous injuries to the table that will lead to changes in body position, grip, what gun is comfortable, trigger finger placement, what sight someone prefers, shape of trigger, stock they put on a gun, or any million other modifications you can make to your personal firearm.

Have a good reason and know why each modification is for you and why, it will only help to make you a better shooter and have a much better understanding of your shooting style and skill level. I challenge anyone to start basic, shoot till your fingers bleed, and then shoot some more. Burn some barrels out, get your hands on as many different options as possible for everything before deciding that just because instructor X uses it that way it’s the way for you.


@Silvercore #Silvercore #Firearms #Training #BC #Safety #Handgun #Equipment #Skill

Sincerely,
Silvercore Firearms Training
604-940-7785
www.silvercore.ca

Silvercore Handgun Training at the Port Coquitlam & District Hunting & Fishing Club.  

Silvercore instructors spent the day training with a student for Handgun Level 3 at the Justice Institute of BC this coming weekend.  We hope everyone had the opportunity to get to the range over the long weekend!  

If you are itching to get out and train take a look at www.silvercore.ca  not just for courses but for our one day skill development days at the JIBC.

@Silvercore #Silvercore #Firearms #Training #BC #Safety #Handgun #tactical #JIBC
Sincerely,
Silvercore Firearms Training
604-940-7785
www.silvercore.ca

Monday, 21 April 2014

Silvercore Handgun Training at the Port Coquitlam & District Hunting & Fishing Club.

Silvercore Handgun Training at the Port Coquitlam & District Hunting & Fishing Club.  

Silvercore instructors spent the day training with a student for Handgun Level 3 at the Justice Institute of BC this coming weekend.  We hope everyone had the opportunity to get to the range over the long weekend!  

If you are itching to get out and train take a look at www.silvercore.ca  not just for courses but for our one day skill development days at the JIBC.

@Silvercore #Silvercore #Firearms #Training #BC #Safety #Handgun #tactical #JIBC
Sincerely,
Silvercore Firearms Training
604-940-7785
www.silvercore.ca

Thursday, 17 April 2014

The Barret XM109 - SILVERCORE FIREARMS TRAINING

The Barret XM109 - SILVERCORE FIREARMS TRAINING



Originally known as the “Payload Rifle” 

The Barret XM109. Chambered in 25 x 59mm. Capable of defeating light armor and material out to 2 km (1.2mi)

The XM109 offers greater range and a shorter overall length than the previous M82/M107 systems, as well as potentially greater power in the 25 × 59 mm cartridge over .50 BMG cartridge.

The rifle is currently under development by Barrett firearms Manufacturing.

C.T. http://weaponslover.tumblr.com/

@Silvercore #Silvercore #Firearms #Training #BC #Safety #Canada #Barret #XM109
Sincerely,
Silvercore Firearms Training
604-940-7785
www.silvercore.ca

Wednesday, 16 April 2014

New 2014 Live Fire Courses from Silvercore Training

http://myemail.constantcontact.com/Silvercore-Training-upcoming-events.html?soid=1102857303352&aid=YEPZzp1XNR0#fblike



New 2014 Live Fire Courses from Silvercore Training



For further inquiries on Silvercore courses contact us,

604-940-7785










Skill Set Development Program

New 2014 Skill Set Development Dates

Refine and perfect your Handgun skills through industry structured programs designed for the armed professional while under the direct supervision and coaching of certified firearms instructors.  


JIBC LESD Handgun Familiarization 


New 2014 JIBC LESD Dates 

Learn handgun fundamentals commonly taught to armed professionals. A good introduction to those interested in a career in the law enforcement field.
















Tuesday, 15 April 2014

Lever Release vs. Button Release - SILVERCORE FIREARMS TRAINING BC

Lever Release vs. Button Release - SILVERCORE FIREARMS TRAINING BC



Which is easier to build muscle memory with? 

So many people dismiss the HK-style paddle/lever mag catch without putting serious time behind it, but at the same time there are folks who can't accept that some shooters genuinely just prefer the button. Personally, the ability to hit the paddle with my trigger finger is a huge boon because it allows me to drop the mag without shifting my grip at all. SO:
Which is easier to build muscle memory with? 
Lever Release vs. Button Release

C.T. https://www.facebook.com/hecklerandkoch/photos/a.492278300813461.114246.107615925946369/613578315350125/?type=1&theater

@Silvercore #Silvercore #Firearms #Training #BC #Safety #Canada #H&K #Licence 

Sincerely,
Silvercore Firearms Training
604-940-7785
www.silvercore.ca

700 grain lead flat nose bullet for the 500 S&W Magnum - Silvercore Firearms Training BC

700 grain lead flat nose bullet for the 500 S&W Magnum - Silvercore Firearms Training BC





A 700 grain lead flat nose bullet for the 500 S&W Magnum. First photo shows just the bullet next to a .40 S&W. Second photo the complete round next to a .22 LR. Third photo with a 45-70 Govt and .40 S&W flanking it. (GRH)
C.T. http://forum.pafoa.org/ammunition-reloading-25/213890-700-grain-reloads-s-w-500-a.html

C.T. http://gunrunnerhell.tumblr.com/

@Silvercore #Silvercore #Firearms #Training #BC #Safety #Canada #GunSafe #Licence

Sincerely,
Silvercore Firearms Training
604-940-7785
www.silvercore.ca

Monday, 14 April 2014

THE MODIFIED GLOCK - Silvercore Firearms Training BC

THE MODIFIED GLOCK - Silvercore Firearms Training BC

BY JERRY JONES   |   POSTED ON 04/14/2014 |   IN 10-8 CONSULTING COURSES 10-8 PERFORMANCE GEAR MODERN SERVICE PISTOLS WEAPON MAINTENANCE WEAPON MODIFICATION



Glocks tend to run great out of the box.  They are reliable, and accurate.  I have a friend who shoots a lot of 3 gun and IDPA with a completely stock Glock 17 with the plastic sights, and does it well.  Some folks like to simply change out of the plastic “filler” sights that come stock, for aftermarket sights such as 10-8′s.I like my Glocks a bit more modified.  Above is a brand new Gen4 G19 that is a recent acquisition.  The gun shot great out of the box, but there are changes that I like to make for my own benefit.The first thing that has to go for me is the serrated trigger and trigger bar that come standard on compact and subcompact Glocks.  After a few hundred rounds down range, the serrated trigger becomes bothersome for me, so I just swap it out for the non-serrated full size trigger.

The next thing I like to change is the connector.  While the stock connector, or (-) minus connector can be shot well, I like the addition of the Ghost Rocket 3.5 “Deluxe”.  Across the dozen or so Glocks that I own, the trigger pull across the board with the Ghost Rocket and factory trigger return spring lends a pull of about 4.25 to 4.5 pounds.  But the reduction in poundage isn’t the reason I like them.  I like them because I can get a smooth prep shot to shot, even at four or five shots per second.  The factory connectors tend to wind up with a little “pressure wall” at the end of the trigger stroke, when can disrupt the sights just a bit at the time of ignition.

Moving onward, I add an extended slide stop to my G19′s.  While I don’t like them on the G26, G17, or G34 (or the .40 caliber counterparts), I do like the extended slide stop on the G19.A good set of sights.  I like and advocate 10-8′s.  I also have guns set up with Trijicon HD’s, and Scott Warren’s.  The thing I’ll caution people to is that you do need to research the particular sights before you purchase them, if you intend on shooting the gun past conversational distances.  A lot of the sighting systems out there will cause the point of impact to be above the point of aim on Glocks.  It is the nature of the beast.

I like the “butt plug” on the Glock, and have used them for years.  On the Gen3′s I used mainly the Jentra, but this round I bought two or three and tried them out.  I use them for an aid on the reload, and the Pearce seems to work the best for me.

Rounding the gun out with an Apex FRE, some spare recoil springs, a few plus two extensions to play with and 20 new G19 factory magazines, and this is going to probably be my primary training and teaching gun for 2014.Glocks run fine out of the box.  If you like a little modification, like I do, they run a bit better!

C.T. http://modernserviceweapons.com/?p=7622

@Silvercore #Silvercore #Firearms #Training #BC #Safety #Canada #Glock #Modifications

Sincerely,
Silvercore Firearms Training
604-940-7785
www.silvercore.ca
https://plus.google.com/+SilvercoreCa

Saturday, 12 April 2014

How Not To Dry Off Your Polymer Pistol - Silvercore Firearms Training

How Not To Dry Off Your Polymer Pistol - Silvercore Firearms Training




During all of Silvercore's firearms courses we caution our students to view information from the internet with scrutiny.  Individuals often bring up the using home appliances for one reason or another to clean guns. Here is a cautionary tale:

These photos are of a Sig Sauer Pro that was left in an electric oven at 210°c / 400°f for 20 minutes. After cleaning it was put in to dry. The owner was then distracted by a phone call. -

C.T. http://www.thefirearmblog.com/blog/2008/12/22/sig-oven-bad-idea/

@Silvercore #Silvercore #Firearms #Training #BC #Safety #Canada #Cleaning #Gun Safe #Servicing  

Sincerely,
Silvercore Firearms Training
604-940-7785
www.silvercore.ca

Friday, 11 April 2014

GLOCK VS. M&P REVISITED - Silvercore Firearms Training

GLOCK VS. M&P REVISITED - Silvercore Firearms Training

BY HILTON YAM   |   POSTED ON 04/07/2014   |   IN MODERN SERVICE PISTOLS



A couple years ago, I wrote an article titled “Glock vs. M&P…or Why I Shoot An M&P.”  At the time that I wrote the article, the Gen4 Glock was still in an early phase of adoption and had some function issues, and the M&P had not yet begun what is now the most current round of production upgrades. Since no one seems to read the linked articles, I’ll sum it up for you right here: I opted to work around the issues of the M&P, using that as my primary training gun – M&P fans cheered, Glock fans burned me in effigy. I thought it would be worthwhile to revisit this now that the state of both pistols has changed quite a bit in the last couple years. 

The M&P has undergone a series of production upgrades in the last 2 years which makes it a very strong candidate for an out of the box service pistol, with no significant flaws.  The previously known issues with accuracy of the factory barrels with the 1:18.75″ twist have been resolved with new barrels featuring a 1:10″ twist, the same as in factory Glock barrels.  The M&P is no longer ammunition sensitive, and provides accuracy similar to the Glock using various bullet weights.  The M&P slide stop, trigger bar, and sear have gone through several generational changes, and the latest guns have crisp breaking trigger with reduced overtravel and positive reset.

Glocks, in particular the Gen4 9mm variants, have undergone changes with the ejectors and recoil spring assemblies, largely resolving the reliability issues of the early guns.

If you are shooting .40 because of departmental constraints, then the playing field has leveled out a bit with the production of the Gen4 Glock, which offers a purpose built dual recoil spring system which significantly softens the recoil and promotes greater longevity than the Gen3 guns.  Function with attached weapon lights is also dramatically improved in the Gen4.  Only 2 years ago, the clear choice in .40 was the M&P, but now users have the added option of the Gen4 Glock 22 or 23.

On of the other quirks that I highlighted in the original article compared reloading in both guns, and that has not changed.  The M&P still has the edge in factory configuration, as the Glock frames still have the big hole at the rear of the frame which is a huge snag point for incoming reloads.  If department policy permits, this is an easy fix with the installation of an inexpensive grip plug.

Another feature was that of magazine disassembly, which for some reason brought on some bit of ire from readers.  The Glock magazine is still slower and more difficult to disassemble than the M&P – if you don’t believe me, time yourself disassembling 4 mags.  Why should you care?  If you train enough, you’ll end up out in the rain or mud and a mag is sure to end up nose down in something which should be cleaned out of the tube.  The M&P mag is quick to disassemble for cleaning, and my Glock mags have defaulted to getting brushed out in the assembled state.  No real functional advantage to either platform here, just different if you are rebuilding mags or installing base pads (which I do a lot, since we seem to have a lot of those here).

Given the choice between the two bone stock pistols as pictured above, the current state of manufacturing has left us in a dead heat.  Sorry, not much fodder for flaming me on fan forum threads, but it’s a good thing for the end user as both the Glock and M&P are solid contenders now.  It’s just up to you to choose which one fits your needs best.

C.T. http://modernserviceweapons.com/?p=7556
@Silvercore #Silvercore #Firearms #Training #BC #Safety #Canada #M&p #Gun Safe #Glock

Sincerely,
Silvercore Firearms Training
604-940-7785
www.silvercore.ca

Silvercore Firearms Training Head Office April 2014

Silvercore Firearms Training Head Office April 2014

A nice sunny day hear at the Silvercore head office in Delta. A CORE hunter education course just warped-up in the upstairs classroom. We hope every one gets some trigger time this weekend.
Silvercore Firearms Training Head Office April 2014
Silvercore Firearms Training Head Office April 2014
Silvercore Firearms Training Head Office April 2014
Silvercore Firearms Training Head Office April 2014
  @Silvercore #Silvercore #Firearms #Training #BC #Core #hunting
Sincerely,
Silvercore Firearms Training
604-940-7785

Wednesday, 9 April 2014

Legal Firearms Discharge Areas in Lower Mainland of BC - Silvercore Firearms Training BC

Legal Firearms Discharge Areas in Lower Mainland of BC - Silvercore Firearms Training BC


People also want to know where they can shoot their long guns in the bush and how far they need to drive until they can shoot non-restricted rifles and shotguns while camping.  This map is one resource that can help. 

 The full document can be found here: http://www.env.gov.bc.ca/fw/wildlife/hunting/regulations/docs/FVSAH2012.pdf

This is a map of the areas you can and can’t discharge firearms in the lower mainland. Always remember this is a guid only all discharging of firearms most be done safely and in full compliance with all Federal, Provincial and Municipal laws & bylaws.




@Silvercore #Silvercore #Firearms #Training #BC #Safety #Canada #Hunting 

Sincerely,
Silvercore Firearms Training
604-940-7785

www.silvercore.ca

Sunday, 6 April 2014

The evolution of the teacup handgun grip:-P - Silvercore Firearms Training

The evolution of the teacup handgun grip:-P



@Silvercore #Silvercore #Firearms #Training #BC#Safety #Canada

Sincerely,
Silvercore Firearms Training
604-940-7785
www.silvercore.ca

External ballistics - Silvercore Firearms Training BC

In order for a projectile to impact any distant target, the barrel must be inclined to a positive elevation angle relative to the target. This is due to the fact that the projectile will begin to respond to the effects of gravity the instant it is free from the mechanical constraints of the bore. Thus, a bullet fired with a zero elevation angle can never impact a target higher than or at the same elevation as the center axis of the bore. The imaginary line down the center axis of the bore and out to infinity is called the line of departure and is the line on which the bullet leaves the barrel. As the bullet travels downrange, it arcs below the line of departure as it is being deflected off its initial path by gravity.

For hitting a distant target an appropriate positive elevation angle is required that is achieved by angling the line of sight from the shooter's eye through the centerline of the sighting system downward toward the line of departure. This can be accomplished by simply adjusting the sights down mechanically, or by securing the entire sighting system to a sloped mounting having a known downward slope, or by a combination of both. This procedure has the effect of elevating the muzzle when the barrel must be subsequently raised to align the sights with the target. A bullet leaving a muzzle at a given elevation angle follows a ballistic trajectory whose characteristics are dependent upon various factors such as muzzle velocity, gravity, and aerodynamic drag. This ballistic trajectory is referred to as the bullet path.

Bullet path is of great use to shooters because it allows them to establish ballistic tables that will predict how much elevation correction must be applied to the sight line for shots at various known distances.





@Silvercore #Silvercore #Firearms #Training #BC#Safety #Canada

Sincerely,
Silvercore Firearms Training
604-940-7785
www.silvercore.ca

Saturday, 5 April 2014

Popular Body armour Levels Explained - Silvercore Firearms Training BC



Ammunition From The Chart:

1. .22 Magnum 40 gr. JHP (1209 FPS / 369 MPS)
2. .32 ACP 60 gr. Silvertip JHP (936 FPS / 285 MPS)
3. .380 ACP 95 gr. FMC (902 FPS / 275 MPS)
4. .38 Special 125 gr. Nyclad SWHP (1009 FPS / 308 MPS)
5. .38 Special +P 110 gr. JHP (1049 FPS / 320 MPS)
6. .38 Special +P 140 gr. JHP (869 FPS / 265 MPS)
7. 9mm 124 gr. FMC (1173 FPS / 358 MPS)*
8. 9mm 125 gr. JSP (1121 FPS / 342 MPS)
9. 9mm 147 gr. Black Talon (1010 FPS / 308 MPS)
10. 9mm 147 gr. Golden Saber (1083 FPS / 330 MPS)
11. 9mm 147 gr. Hydra Shok (1011 FPS / 308 MPS)
12. .357 Magnum 158 gr. JSP (1308 FPS / 399 MPS)
13. .357 Magnum 110 gr. JHP (1292 FPS / 394 MPS)
14. .357 Magnum 125 gr. JHP (1335 FPS / 407 MPS)
15. .40 Caliber 180 gr. FMJTC (992 FPS / 302 MPS)
16. .40 Caliber 170 gr. FMJTC (1095 FPS / 334 MPS)
17. 10mm 155 gr. FMJTC (1024 FPS / 312 MPS)
18. 10mm 170 gr. JHP (1137 FPS / 347 MPS)
19. .41 Magnum 210 gr. LSWC (1141 FPS / 348 MPS)
20. .44 Magnum 240 gr. LFP (1017 FPS / 310 MPS)
21. .45 Long Colt 250 gr. LRN (778 FPS / 237 MPS)
22. .45 ACP 230 gr. FMJ (826 FPS / 252 MPS)
23. 12 Ga. 00 Buck (9 pellet) (1063 FPS / 324 MPS)
24. 9mm 124 gr. FMJ (1215 FPS / 370 MPS)*
25. 9mm 115 gr. Silvertip JHP (1252 FPS / 382 MPS)
26. 9mm 124 gr. Starfire JHP (1174 FPS / 358 MPS)*
27. .357 Magnum 158 gr. JSP (1453 FPS / 443 MPS)*
28. .357 Magnum 145 gr. Silvertip JHP (1371 FPS / 418 MPS)
29. .357 Magnum 125 gr. JHP (1428 FPS / 435 MPS)
30. 10mm 175 gr. Silvertip JHP (1246 FPS / 380 MPS)
31. .41 Magnum 210 gr. JSP (1322 FPS / 403 MPS)
32. .44 Magnum 240 gr. SJHP (1270 FPS / 387 MPS)
33. 9mm 124 gr. FMJ (1440 FPS / 439 MPS)*
34. 9mm 115 gr. FMJ Israeli (1499 FPS / 457 MPS)
35. 9mm 123 gr. FMJ Geco (1372 FPS / 418 MPS)
36. 9mm 124 gr. FMJ Cavin (1259 FPS / 384 MPS)
37. .44 Magnum 240 gr. LSWC (1448 FPS / 441 MPS)*
38. .44 Magnum 240 gr. HSP (1320 FPS / 402 MPS)
39. 12 ga. 1 oz. Rifled Slug (1290 FPS / 393 MPS)
40. 12 ga. 1 oz. Rifled Slug (1254 FPS / 382 MPS)

Bullet Abbreviations

The following standard abbreviations are used to designate types of bullets or projectiles contained in the rounds tested.

FMC/J Full Metal Case/ Full metal Jacket
FMJTC Full Metal Jacket Truncated Cone
HSP Hollow Soft Point
LRB Lead Round Ball
LRN Lead Round Nose
LSWC Lead Semi-Wadcutter
JHP Jacketed Hollow Point
JSP Jacketed Soft Point
LFP Lead Flat Point
SJHP Semi-Jacketed Hollow Point
SWHP Semi-Wadcutter Hollow Point

C.T. http://www.blackgate.net/blog/body-armor-and-ammunition/

@Silvercore #Silvercore #Firearms #Training #BC#Safety #Canada

Sincerely,
Silvercore Firearms Training
604-940-7785
www.silvercore.ca

Frequently Ask Possession and Acquisition License ,Firearms Training, CFSC, & PAL Questions - Silvercore Firearms Training BC

Frequently Ask Possession and Acquisition License ,Firearms Training, CFSC, & PAL Questions  - Silvercore Firearms Training BC 
Silvercore Firearms Training BC Head Office
Q: I need to get a Firearms Licenses: 

Where can I take the CFSC Canadian Firearms Safety Course?
What do i need to do to get Possession and Acquisition License?

A:Individuals aged 18 years or older can make application for a Possession and Acquisition License.  In order to do so, they must first successfully complete the Canadian Firearms Safety Course  and if wishing to possess restricted firearms they must also show successful completion of the Canadian Restricted Firearms Safety Course.   The issued PAL will indicate the classes of firearms the holder is able to possess and acquire in writing on the back.
In BC contact Silvercore Training they offer a complete syllabus of course that will taking you from the basics firearms licensing to the advanced tactics. Silvercore offers the Canadian Firearms Safety course or CFSC as well as advanced live fire training.  Give them a call at 604-940-7785 or visit www.silvercore.ca .

Q: I need to get a firearms licence or PAL so I can own firearms. Where can I take the PAL course?

A: In Canada Silvercore firearms training is the innovator in firearms training industry. Silvercore is unsurpassed in its quality, customer service and attention to detail. They offer firearms and PAL courses starting almost daily. The Silvercore CFSC course will get you the firearms education you need to legally and safely work with any firearm.  Give them a call at 604-940-7785 or visit www.silvercore.ca .

Q: I need a Possession and Acquisition License to apply for CBSA.
A:The Silvercore CFSC / CRFSC is the course you need for your application to Canada Border Services CBSA. Silvercore offers the gold standard in firearms training. 
Course Schedule: http://www.silvercore.ca/courses/canadian-firearms-safety-course-slash-canadian-restricted-firearms-safety-course

Q: Challenging the Canadian firearms Safety Course:

Q: I want to challenge the Canadian Firearms Safety Course?
Q: I want to challenge my Gun license exam?
Q: Do I have to take the whole firearms safety course or can I simply write the test?
Q: I have military experience can I simply bypass the Canadian Firearms Safety Course and get my Possession Acquisition License another way?
Q: I have Police experience can I simply bypass the CFSC and get my PAL?
Q: I need to upgrade my POL to a PAL but I don’t want to take the course. How do I upgrade my gun licensed without taking the course?

A:People challenging the CFSC or CRFSC must be 18 years or older and have significant firearms experience. For details on challenging the CFSC contact Silvercore Firearms Training 604-940-7785 or visit www.silvercore.ca .
Book a Challenge Test: http://www.silvercore.ca/courses/course-challenge-only

Q: I want to get an Firearms Acquisition Certificates FAC or I want to take a test to get my FAC 
A: FAC or Firearms Acquisition Certificates are no longer issued in Canada. The firearms license is still available but is now known as a PAL or Possession Acquisition License. Give Silvecore a call for more details at 604-940-7785 or visit www.silvercore.ca .

C.T. http://www.firearms-safety-course.com/index.php?option=com_content&view=article&id=59&Itemid=74

Silvercore Firearms Training BC Classroom Silvercore Firearms Training BC

@Silvercore #Silvercore #Firearms #Training #BC #Glock #Safety #Canada

Sincerely,
Silvercore Firearms Training
604-940-7785
www.silvercore.ca